STP vacuum insulation board is made of core material with very strong heat insulation performance and encapsulated by high heat insulation packaging material in vacuum, which has excellent heat insulation performance. The core material of STP vacuum insulation board for exterior wall is composed of nano-silica powder and non-polar fiber. The core material after vacuum has certain strength and can play the role of framework support. Because the STP vacuum insulation board relies on the strength of vacuum, if the packaging bag is destroyed, it will cause the STP vacuum insulation board to expand and bulge. Here is a brief introduction to how to avoid the STP vacuum insulation board bulging.
1, when handling STP vacuum insulation board, we must gently handle it, and strictly prohibit throwing, kicking and trampling.
2. When stacking, the front side of the STP vacuum insulation board should be placed parallel to the ground, and no vertical placement shall be strictly prohibited. It is stacked and neatly placed and marked to prevent repeated handling during specifications. In the construction site, we must set up temporary storehouse, lay the floor mat and pile up neatly.
3. During the construction, the workers are required to take and put the STP vacuum insulation board correctly and lightly. It is strictly forbidden to throw and throw the STP vacuum insulation board among themselves. When smearing mortar on STP vacuum insulation board, the usual wipes are all around right angle, it is best to buy wipes with rounded corners around to spread, to prevent the wipes from scratching the package bag;
4. The large STP vacuum insulation plate needs to be nailed and fixed. When nailing, it must be nailed to the middle of the hole reserved on the board. It is forbidden to punch and fix at will.